Kasai FS DYNACOIL DISC Dynamo Hub
$199.00
$199.00
Shipping calculated at checkout.
Close
Couldn't load pickup availability
Description
Efficient and FIELD SERVICEABLE dynamo hub for 700c, 650b and 26" wheels. Meets German StVZO standards (K1280).
Impressive efficiency: 72% at 10mph.
Most dynamo hubs are sealed at the factory and cannot be repaired by the road side or in a bike shop. These hubs need to be cut off the wheel and must be sent back to the factory.
Not with the Kasai FS Dynacoil. The bearings and the entire coil assembly of the Kasai FS can be replaced using two simple tools.
Impressive efficiency: 72% at 10mph.
Most dynamo hubs are sealed at the factory and cannot be repaired by the road side or in a bike shop. These hubs need to be cut off the wheel and must be sent back to the factory.
Not with the Kasai FS Dynacoil. The bearings and the entire coil assembly of the Kasai FS can be replaced using two simple tools.
- 6v / 3w
- Fits 6-bolt rotor or Centerlock rotor
- 15mm Thru-axle
- Aluminum shell
- Sealed cartridge bearings
- Anodized black or silver finish
- Drilling: 32-36h
- OLD: 100mm
- Flange-Flange: 50mm
- Spoke PCD: 60 / 66(driveside)
- Weight: 495g
Tab title
Efficient and FIELD SERVICEABLE dynamo hub for 700c, 650b and 26" wheels. Meets German StVZO standards (K1280).
Impressive efficiency: 72% at 10mph.
Most dynamo hubs are sealed at the factory and cannot be repaired by the road side or in a bike shop. These hubs need to be cut off the wheel and must be sent back to the factory.
Not with the Kasai FS Dynacoil. The bearings and the entire coil assembly of the Kasai FS can be replaced using two simple tools.
Impressive efficiency: 72% at 10mph.
Most dynamo hubs are sealed at the factory and cannot be repaired by the road side or in a bike shop. These hubs need to be cut off the wheel and must be sent back to the factory.
Not with the Kasai FS Dynacoil. The bearings and the entire coil assembly of the Kasai FS can be replaced using two simple tools.
- 6v / 3w
- Fits 6-bolt rotor or Centerlock rotor
- 15mm Thru-axle
- Aluminum shell
- Sealed cartridge bearings
- Anodized black or silver finish
- Drilling: 32-36h
- OLD: 100mm
- Flange-Flange: 50mm
- Spoke PCD: 60 / 66(driveside)
- Weight: 495g